Volvo 819 E - Page 84

Group 28 Ign i tion s ystems
Fault trBcing, TZ·28H
Insert and ti ghten all screws.
Insert
connector securi ng pin (1).
Install :
- t rigge r rotor (2)
- locking
pin (3)
- circlip (4 ).
139 S21
Install distributor
Ensure that No . 1 eylinder is at TOe .
Turn rotor arm clockwise about BO ° from mark on dis-
tribut or housing .
Place dis
tr i butor in position.
Rotor arm should now be aligned with mark on dis -
tributor housing .
Remove rotor arm.
InstaU:
- moisture shield (plastic cover)
-
rotor arm
-
distributor cap.
131