VTech 17450 - Page 38

38
NOTE
S
• If there is more than one handset registered to the base,
the handset on the main base unit should be left as a power
supply of the base and you can use the other handset(s) to
make calls like normal.
• The handset should always remain on the main base unit for
the entire length of the call.
To answer a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
1. When the phone rings, keep the handset on the
main base unit and press
to answer the call. The
speakerphone will be turned on automatically and
call is made.
2. To end the call, press
.
NOTE
S
• If there is more than one handset registered to the base,
the handset on the main base unit should be left as a power
supply of the base and you can use the other handset(s) to
receive calls like normal.
• The power supplying handset should always be placed on
the main base unit for the entire length of the call.
• The range of the base unit is limited during Power Fail Back-
Up mode. Keep the handset close to the base unit.