37
POWER FAIL BACK-UP
The Power Fail back-up system lets you make calls
during a mains power interruption with your cordless
phone. During a mains power interruption, you can supply
the power stored in your handset battery to the base unit,
so you can make calls even when the power is out.
NOTE
• Power Fail Back-Up mode will not work if the handset battery
power is not sufcient (usually not lower than level 2).
• Do not pick up the power supplying handset from base when
Power Fail Back-Up mode is activated.
• Do not touch the charging contacts of the power supplying
handset during Power Fail Back-Up mode.
• In Power Fail Back-Up mode none of the base functions,
including the answering machine will operate.
• It may take up to 90 seconds to transition through the Power
Fail Back-Up activation process as the base and handset(s)
synchronise with each other.
Make a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
1. Once the handset is placed onto the main base unit,
enter the telephone number, and then press
. The
speakerphone will be turned on automatically and
call is made.
-OR-
1. Lift up the handset and enter the telephone number.
2. Place the handset back onto the main base unit
within 30 seconds. The speakerphone will be turned
on automatically and call is made.
3. To end the call, press
.
To Next Page
Loading...
Need help?
General
