VTech 17450 - Change Remote Access PIN Code; Voice Guide

71
CHANGE REMOTE ACCESS PIN CODE
1. Press MENU/OK when the phone is not in use. Then,
press / to scroll to ANS. SYS.
2. Press MENU/OK and
/ to scroll to SET TAM.
3. Press MENU/OK and
/ to scroll to CHANGE PIN.
4. Press MENU/OK and enter the new remote access
PIN code.
5. Press MENU/OK to conrm.
VOICE GUIDE
This feature is an alternative way for you to do the basic
setup of the answering system. You can follow the voice
guide to record your own announcement, set the number
of rings and the message alert tone.
1. Press MENU/OK when the phone is not in use. Then,
press
/ to scroll to ANS. SYS.
2. Press MENU/OK and
/ to scroll to SET TAM.
3. Press MENU/OK and
/ to scroll to VOICE GUIDE.
4. You hear the voice prompt “Hello! This voice guide
will assist you with the basic setup of your answering
system.”
5. Setup your answering system by inputting
designated numbers as instructed in the voice guide.