Need help?Do you have a question about the Vu+ DUO and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Audio decoders | - |
| Frequency range | 950 - 2150 MHz |
| Number of tuners | 1 tuner(s) |
| Audio output channels | - channels |
| Operating system installed | Linux |
| Electronic Program Guide (EPG) | Yes |
| Digital Satellite Equipment Control (DiSEqC) | 1.0, 1.1, 1.2 |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Component video (YPbPr/YCbCr) out | 3 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Audio formats supported | AC3, MP3 |
| Image formats supported | JPG |
| Video formats supported | H.264, MPEG2, MPEG4 |
| Wi-Fi | No |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Signal source | Ethernet (RJ-45), Satellite |
| Supported video modes | 1080i, 576p, 720p |
| Digital signal format system | DVB-S, DVB-S2 |
| Display type | VFD |
| Display digits | 16 digits |
| Processor frequency | 400 MHz |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 30 W |
| Dimensions (WxDxH) | 380 x 280 x 60 mm |
Weight and Dimensions| Depth | 280 mm |
|---|---|
| Width | 380 mm |
| Height | 60 mm |
| Weight | 3200 g |
Guidance on safe power connection, avoiding overloading, and proper cable connections.
Precautions for handling, ventilation, liquid exposure, lightening, parts replacement, and battery safety.
Guide to connecting satellite cables to the Vu+ device for signal reception.
Choosing the primary display language for the user interface.
Setting up the satellite connection, including tuner configuration options.
Detailed configuration for Tuners A and B, covering various connection modes and settings.
Performing instant recording, timeshifting, and managing playback.
Configuring tuners, loading service lists, and performing automatic or manual channel scans.
Solutions for common problems related to video, audio, and remote control functionality.
To Next Page