Vu+ DUO - Hard Disk Set up; Front Display Setup

53
Vu User Manual
+
E. Hard Disk Set Up
[
i
: MENU > Setup > System > Harddisk > Harddisk setup]
You can set the duration of time after which HDD is to be put into standby mode.
Here, you can choose from
No standby
10 or 30 seconds
1, 2, 5,10, 20, 30 minutes
1, 2, 4 hours.
Once you set this option, press
GREEN
key to
confirm the change.
F. Front Display Setup
[
i
: MENU > Setup > System > Display Setup]
There is a 16 character dot matrix VFD display on the front panel of Vu+. This display shows various
information like the current menu, channel, HD icon, and so on. You can adjust the brightness of this
display using this menu.
Brightness
You can change the brightness of the front VFD
display using
LEFT/RIGHT
key when the set is in
use.
Standby
You can change the brightness of the front VFD
display using
LEFT/RIGHT
key when the set is in
standby mode.
Once you completed this option, press
GREEN
key to confirm the change.