Vu+ DUO - Page 49

49
Vu User Manual
+
Amongst the parameters given in this menu, the following ones are generally what you need to decide for
the audio and video.
1
Video output
Here you need to decide which video output you want to use between your TV and Vu+.
The available options are as below.
•
CVBS
•
S-Video
•
RGB
2
Mode
You need to decide which resolution to use according to the video output above and your TV amongst
the following options.
Scart
Resolution
PAL
NTSC
Multi
3
AC3 Default
YES
is used when you want to set Dolby Digital audio as the default audio. If the program you are
watching has AC3 and Stereo, AC3 is used.
On the other hand,
NO
is used when you do not want to set Dolby Digital audio as the default audio. If
the program you are watching has AC3 and Stereo audio, Stereo audio is used.
4
AC3 Downmix
YES
is used when you want to set the audio output to be down-mixed from AC3 to Stereo.
NO
is used
when you do not want to set the audio output to be down-mixed from AC3 to Stereo. If
NO
is on and you
are using only HDMI or SCART connection, there can be no audio sometimes, if the program that you
are watching provides AC3 only. This option is recommended when you are using S/PDIF connection.