| Installation
22
|
Puranity TU+ VWR
Chapter 7
1. Tank overflow connector for outer diameter 1/4“ tube
2. Feedwater connector for outer diameter 1/4“ tube
3. Concentrate connector for outer diameter 1/4“ tube
4. Dispenser back flow connector for outer diameter 1/4“ tube for additional hand dispenser
5. Dispenser flow connector for outer diameter 1/4“ tube for additional hand dispenser
6. Connector potential free contact 5 pins
7. Power supply connector 24 V DC
8. RS232 printer connection
9. 1/4“ thread connector for 0.2 µm final filter
10. Quick connectors for RO/pretreatment cartridge
11. Quick connectors for ultrapure cartridge
12. 1/4 thread connector for sterile vent filter
NOTE!
When you are remove the tube jumper between Pos. 4 and Pos. 5, you have the possibility to
connect additionally the accessory hand dispenser, ((171-1181) purchased separately). This
hand dispenser comes with an installation guide.
To Next Page
Loading...