VWR Puranity TU3+ - Error Message and Acoustic Error Signal

VWR Puranity TU+ | 47
System control |
Chapter 12
Error message and acoustic error signal
NOTE!
 If the limiting value of the conductivity or temperature are reached, in the display shows
“- -” or “÷ 200”, the red LED in the second line is lighting up and additionally after
approx. 5 minutes an acoustic signal will sound.
Error Lights up LED in second line and acoustic signal
Limiting value of conductivity is reached
Limiting value of temperature is reached
Limiting value of conductivity and temperature
together is reached
Measuring cell signal incorrect
Limit value
Temp.
Status Sensor
Cond.
Limit value
Temp.
Status Sensor
Cond.
Limit value
Temp.
Status Sensor
Cond.
Limit value
Temp.
Status Sensor
Cond.