VWR Puranity TU3+ - Page 52

| System control
44
| Puranity TU+ VWR
Chapter 12
Step Action Figure
1 Press the “Menu”
button once then the
display shows you the
last adjustment
measurement mode
(green LED lights up).
The first line shows
the selected unit of
measurement
resistance value
(factory adjustments in
MΩ·cm).
2 Use the “Up/Quit” and
“down” button to
choose the resistance
value for measuring
mode (µS/cm or
MΩ·cm) and than
choose the mono
measurement mode
“c” or dual
measurement mode
“ct”.
18.2
First line
Display
µS/cm
MΩ·cm °C
Display shows
Display
or
or
c
ct
Display shows