IVTM
5
Operation
27
Axles with twin tires have their wheels represented outside and inside one
after the other.
– Repeatedly push left button to display the axles of the towing vehicle as well the
axles of the towing vehicle.
The display will switch back to normal mode if no button has been pushed for a
period of 20 seconds.
5.4 Display of faults
When the IVTM detects a fault, an amber or red warning lamp illuminates. Proceed
as follows to display the type of fault on the vehicle:
fter lighting up of amber or red warning lamp.
The pressure value of the affected wheel will be indicated and the position
If no current defect is found the system does not react to pressing right but-
ton.
– Push right button a
on the vehicle is indicated by a flashing wheel icon.
fig. 5-5: Display of faults
ind
Repea
If the system warns about several tires then the tire with the most serious fault is
icated first.
ted pressing of right button will show further faults.
fig. 5-6: Creeping pressure loss
The individual fault types are shown in the following:
To Next Page
Loading...
