IVTM
7
Workshop instructions
39
7 Workshop instructions
This chapter provides information for the repair. Furthermore, you will also receive
help in the case that the product does not function as expected. Please observe
the instructions for disposal at the end of the chapter.
WARNING
Regulations / Instructions
safety regulations of the respective coun-
ehicle manufacturer's instructions.
– Observe the occupational health an
try, the workshop as well as the v
d
WARNING
icle.
Rolling away of the vehicle
Vehicles not secured may roll away during the assembly. This might lead to severe
injuries or even death.
– Secure the vehicle against rolling away before carrying out work on the veh
WARNING
Da lth due to dust
Dust that are dangerous to health are generated when the rim is cleaned using
compressed air.
– For this purpose, do not clean the rims using compressed air.
nger to hea
WARNING
Loose wheel nuts
Loose wheel nuts may lead to accidents when driving on roads.
– Wheel nuts must be tightened with torque specified by vehicle manufacturer.
– Check the tightness of the wheel nuts after 500 km.
Maintenance
IVTM system is maintenance-free.
Only when the display indicates a malfunction, fault finding must be performed with
diagnosis.
To Next Page
Loading...
