6
IVTM
Installation
fig. 6-9: Stimulation wheel module
– rom all wheel modules.
–
ning protocol.
– Print the vehicle type plate on self-adhesive tin foil (WABCO no. 899 200 922 4).
– Affix vehicle type plate to protected, easy readable location on the vehicle.
– End the start-up in the diagnostic software.
– Check operation on IVTM display and data exchange with towing vehicle re-
Check if data has been received f
Configure possible warning lamps.
– Delete content of diagnostic memory.
– Print the commissio
spectively.
38
To Next Page
Loading...
