IVTM
6
Installation
31
6 Installation
In this chapter, you will learn how the IVTM is installed your vehicle.
Observe all safety instructions when carrying out assembly work on the vehicle.
WARNING
– Observe the occupational health and safety regulations of the respective coun-
try, the workshop as well as the vehicle manufacturer's instructions.
Regulations / Instructions
WARNING
Rolling away of the vehicle
ere Vehicles not secured may roll away during the assembly. This might lead to sev
injuries or even death.
– Secure the vehicle against rolling away before carrying out work on the vehicle.
WARNING
Danger to health due to dust
are dangerous to nerated when the rim is cleaned using
– For this purpose, do not re air.
Dust that health are ge
compressed air.
clean the rims using comp ssed
WARNING
Loose wheel nuts
Loose wheel nuts may lead to accidents when driving on roads.
– Wheel nuts must be tightened with torque specified by vehicle manufacturer.
– Check the tightness of the wheel nuts after 500 km.
To Next Page
Loading...
