WABCO IVTM - Diagnosis Components and Software

7
IVTM Workshop instructions
40
7.1 Diagnosis
Diagnostic components
s.
ct number of the
required diagnostic components from the chart.
The IVTM diagnostic cable 446 300 348 0 is used for diagnosis on towing vehicle
When carrying out diagnosis on trailers, please extract the produ
System in trailer vehi-
cl s e
Type of diagnosis Required components
Vario C
VCS
Diagnosis using diagnostic
cable 446 300 329 2
Diagnostic cable 446 300 329 2
ECAS
TCE
VCS II
TEBS before 2004
TEBS since 2004
VCS II
Diagnosis via Diagnostic
Interface (serial)
021 0
Diagnostic Interface (serial)
446 301 021 0
CAN converter 446 300 470 0
Connection adapter ISO 7638
0
446 301
w
ith
CAN socket 446 300 360
TEBS since 2004
VCS II
Diagnosis via Diagnostic
Interface (USB)
Diagnostic Inte
446 301 022 0
446 301 022 0
rface (USB)
Diagnostic cable 446 300 361 0
Connection adapter ISO 7638
with CAN socket 446 300 360 0
TEBS E Premium (Di- Diagnosis via Diagnostic Diagnostic In
ag ostic port with yellow Interface (USB or serial)
serial) n
terface (USB or
gnostic cable 446 300 348 0
cap)
Dia
Table: 7-1: Diagnostic components for trailer vehicles
Diagnostic Software
The diagnostic software is available in various languages.
Information concerning the current version of the diagnostic software and language
versions available can be obtained at
https://www.am.wabco-auto.com/mywabco/
.
The WABCO diagnostic software is self-explanatory. The function of the diagnostic
software is described in help texts.
The diagnostic memory and current measuring data can be obtained using the di-
agnostic software. In the event of malfunctions, the fault will be described and pos-
sible countermeasures will be indicated.
The ECU settings can not be changed in diagnostic mode. Entering a PIN is re-
quired for the parameter settings.