5-35 OM 28Z3 US – Edition 2.0 * * 28Z3b540.fm
Maintenance
5.15 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance
manual of the attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
50 s/h service
Every 250 s/h
Every 500 s/h
Every 1000 s/h
once a year
Every 1500 s/h
Customer
Authorized Wacker
Neuson service
center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●
●●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Air filter element – maintenance display on filter
●
• Coolant
●●
• Hydraulic oil filter insert
4
●● ●
• Hydraulic oil
●●
• Hydraulic oil reservoir breather
●●
• Gearbox oil
5
●●●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil
●●
• Engine coolant
●●
• Hydraulic oil
●●
• Gearbox oil
●●
Clean water ducts
6
●●
Check engine cooler and hydraulic oil for contamination. Clean if necessary
●●
Check cooling systems, heating and hoses for leaks and pressure (visual check)
●●
Replacing the cab filter
●●
Air filter (damage)
●●
Check the pilot control filter for dirt, clean it if necessary
●●
Prefilter with water separator: drain water
●●
• Clean
●●
Check V-belt condition and tension
●●
Maintenance
To Next Page
Loading...
Need help?
General
