OM 28Z3 US – Edition 2.0 * 28Z3b330.fm 3-29
Operation
Unfastening the seat belt:
☞ Unfasten seat belt 12 as follows:
• Hold the seat belt.
• Press red catch C on buckle B.
➥Latch A is released from buckle B by spring pressure.
• Slowly return the seat belt to the retractor.
Longer/shorter lap belt adjustment:
☞ Lengthen the lap belt as follows:
• Hold buckle latch A at a right angle to the seat belt and pull the seat belt to the
required length.
• To shorten the lap belt, just pull the free end D of the belt.
3.12 Emergency exit
You can enter and exit the cab through the front window in an emergency.
Caution!
Personal injury hazard. Do not use the side or front window as routine exits
from the machine. Windows are to be used as exits only if the access opening
(door for cab option) is blocked or cannot be opened through normal operating
procedures.
• The controls are active if the engine is not stopped. Inadvertent control
movement with the engine running during an emergency exit can increase
the risk of injury. Stop the engine before exiting through an emergency
exit..
• Enter and exit the cab through the side and front windows in an emer-
gency only.
Opening the front window completely:
☞ – see Front window on page 3-30
Fig. 29: Unfastening the seat belt
12
B
A
C
Fig. 30: Longer/shorter seat belt adjustment
A
D
To Next Page
Loading...
Need help?
General
