3-22 OM 28Z3 US – Edition 2.0 * * 28Z3b330.fm
Operation
Parking the machine on slopes
☞ Avoid stopping the machine abruptly. Always make sure there is enough space for
stopping the machine.
• Park the machine on level ground with sufficient bearing capacity. Never park on
slopes. If you cannot avoid parking the machine on a slope:
☞ Place chocks under the tracks and lower the attachment into the ground to prevent
the machine from moving.
• Serious accidents can be caused by unintentionally actuating the control levers, and
accidentally moving the attachment or the entire machine.
☞ Always fold the control lever base up before leaving the seat.
☞ Place the stabilizer blade downhill and lower it to the ground.
Fig. 15: Parking the machine on slopes
To Next Page
Loading...
