Wacker Neuson 28Z3 - Type Labels and Component Numbers

OM 28Z3 US – Edition 2.0 * 28Z3b110.fm 1-9
Introduction
1.9 Type labels and component numbers
Serial number
The serial number is stamped on the machine chassis. It is also located on the type label.
The type label is located at the front right on the machine chassis (at cab level)
Type label information
Example: 28Z3
Model: 28Z3
Year: 2010
PIN: AE 000000
Output: 15.2 kW (20,4 hp)
Mass: 2670 kg (5886 lb)
Load: ---------------
Max. gross mass: ---------------
Max. axle load: ---------------
---------------
Other information – see chapter 6 Specifications on page 6-1
Cab compliance certification number
The cab compliance certification number(arrow) is located on the chassis of the cab, at the
upper left beside the door. This number indicates compliance with TOPS (ISO 12117),
ROPS(ISO 3471) or FOPS (ISO 3449).
Engine number
The type label (arrow) is located on the valve cover (engine).
Example: Yanmar 46557
Fig. 1: Type label: location
Fig. 2: Type label
Fig. 3: Cab type label
Fig. 4: Diesel engine number