OM 28Z3 US – Edition 2.0 * 28Z3b320.fm 3-7
Operation
Check lists
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring jobs listed below are described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Start-up checklist
Check the following points before putting the machine into operation or starting the engine:
No.
Question
✔
1
Enough fuel in the tank? (âž 5-2)
2
Coolant level OK? (âž 5-9)
3
Water drained from the water separator? (âž 5-5)
4
Engine oil level OK? (âž 5-6)
5
Oil level in hydraulic reservoir OK? (âž 5-17)
6
Water level in washer tank OK? (âž 3-25)
7
V-belt condition and tension checked? (âž 5-14)
8
Lubrication points greased? (âž 5-25)
9
Tracks checked for cracks, cuts etc. ? (âž 5-23)
10
Lights, signals, indicators, warning lights OK?
(âž 3-23)
11
Windows, mirrors, lights and steps clean?
12
Control lever base folded down? (âž 3-33)
13
Attachment safely locked? (âž 3-57)
14
Engine cover safely locked? (âž 3-32)
15
Especially after cleaning, maintenance or repair work:
➥ Rags, tools and other loose objects removed?
16
Correct seat position? (âž 3-26)
17
Seat belt fastened? (âž 3-28)
To Next Page
Loading...
Need help?
General
