5-16 BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm
5 Operation
Drive levers/accelerator pedals
Accident hazard! The machine moves in the opposite direction if the
upper carriage is rotated by 180° and the drive levers/accelerator
pedals are actuated.
Injury hazard due to incorrect machine operation.
► Slowly and carefully actuate the pedals and control levers.
In order to avoid excessive track abrasion:
► Ensure that both tracks move as you change direction.
The stabilizer blade side is the front side.
Raise the attachment and the stabilizer blade.
Both the drive levers and the accelerator pedals can be used for driving.
The travel speed depends on the position of the drive levers or accelerator
pedals.
The rear part of the accelerator pedals can be folded forward to save
space.
Fig. 136Accelerator pedals/drive levers
1
2
3
4
1
2
3
4
Position Function
1
2
Move forward
Move forward
Machine moves forward
3
4
Move backward
Move backward
Machine moves backward
3
2
Move backward
Move forward
Machine turns to the left
1
4
Move forward
Move backward
Machine turns to the right
To Next Page
Loading...
