BA ET18, 20, 24 en* 1.5 * et18_20_24i400.fm 4-3
Putting into operation 4
Releasing the door arrester
Pull button A to release the door out of the arrester.
Opening the door to a gap
The door can be damaged.
► Bear in mind the larger width of the machine if the door is opened to a
gap.
► Close the doors when performing machine travel through passages.
1. Raise door opener A.
2. Open the door until it engages in door lock B.
3. Let door opener A engage in door lock B.
Unlocking (from inside):
Press lever C inside on the door lock downward.
Unlocking (from outside):
Press the handle.
Fig. 55Releasing the door arrester
A
Fig. 56Opening the door to a gap
A
B
C
To Next Page
Loading...
