4-14 BA ET18, 20, 24 en* 1.5 * et18_20_24i400.fm
4 Putting into operation
Adjusting the retracting seat belt (option)
Injury hazard! Do not drive or work with the seat belt unbuckled.
Causes serious injury or death.
► Fasten and adjust your seat belt before moving off or operating the
machine.
► Do not twist the seat belt when you fasten it.
► Firmly fasten your seat belt over your hips and not over your stomach.
► Do not place the seat belt over hard, edged or fragile items (for
example tools).
► Seat belt buckle must not be obstructed by foreign bodies (paper or
similar); otherwise the buckle latch cannot lock into place.
► The seat belt must be replaced by a Wacker Neuson service center
after an accident, and the bearing capacity of the fastening points and
seat fixtures must be checked.
► Check the seat belts at regular intervals. Have damaged parts
immediately replaced by a Wacker Neuson service center.
Fastening the retracting seat belt
Insert buckle latch A into seat belt buckle B with an audible click.
Unfastening the retracting seat belt
1. Press the red push button D on seat belt buckle B until the buckle latch
comes out.
Seat belt C is automatically retracted.
Fig. 81Fastening the retracting seat belt
A
B
Fig. 82Unfastening the retracting seat belt
D
B
C
To Next Page
Loading...
