4-18 BA ET18, 20, 24 en* 1.5 * et18_20_24i400.fm
4 Putting into operation
Fire extinguisher
A fire extinguisher is not available, neither as standard nor optional
equipment.
A fire extinguisher according to DIN-EN 3 must be installed by a Wacker
Neuson service center.
A bracket for the fire extinguisher must be fastened on the C pillar on the
left for the cabin or canopy.
Ensure the firm and safe installation of the fire extinguisher. Check the fire
extinguisher at regular intervals, also ensure that it is safely installed.
Observe the manufacturer’s indications.
Arm rest
1. Hold the armrest, and loosen and pull out button A.
2. Move the armrest to the required position.
3. Let button A lock into place and tighten it.
Fig. 85Fire extinguisher on C pillar
To Next Page
Loading...
