Wacker Neuson ET65 - Page 156

5-28 BA E14 track en* 1.3 * E14t_13_510.fm
5 Operation
Additional control circuits
AUX II (option)
Toggle between AUX II and AUX III with push button A on the left control lever.
If the AUX II function is selected, the symbol appears in the center of the
display for a few seconds.
Set the desired flow rate..
– see chapter “ Adjusting the starting point and maximum required flow
rate” on page 5-31
A
Fig. 173
Fig. 174
Fig. 175
B
Oil flow Position
To the line on the left Press switch B to the left
To the line on the right Press switch B to the right