GPi
3200/4300
Operation
4.2 Preparing the Machine for First Use
wc_tx001875gb.fm
1.
Make sure all loose packaging materials have been removed from the machine.
2.
Check the machine and its components for damage. If there is visible damage,
do not operate the machine! Contact your Wacker Neuson
dealer immediately
for assistance.
3.
Take inventory
of
all items included with the machine and verify that all loose
components and fasteners are accounted for.
4.
Attach component parts not already attached.
5.
Add fluids as needed and applicable, including fuel, engine oil, and battery acid.
6.
Move the machine to its operating location.
21
W.4.CKER
NEUSON
To Next Page
Loading...
Need help?
General
