Operation
G Pi 3200 I 4300
4.20 Stopping the Generator
Before
stopping
Stopping
procedure
Inform other personnel
on
the jobsite that power is being turned off. Make sure that
the power shutdown
will not create any hazards by turning off devices such as
pumps, heaters,
or
lights that may need to be kept on,
To
stop the generator:
1.
Switch off and disconnect all equipment from the generator.
2.
Allow the generator to run at no load for approximately 3 minutes.
3.
Turn the engine switch (h) to the STOP position.
0
~:.
1
i
/
~N/
®~ART
we Qr006678
4. (Electric start models only): Turn the key switch (g) to the
"0"
(STOP) position.
W-'CKER
NEUSON
44 wc_tx001875gb.fm
To Next Page
Loading...
Need help?
General
