Maintenance
GPi
320014300
5.4 Cleaning the Air Cleaner
When
Clean the air cleaner every 50 hours
of
operation.
Prerequisite
Description
Procedure
Engine is stopped and cool to the touch
The air cleaner assembly consists
of
two urethane forms housed inside the air
cleaner body. A clean air cleaner prevents dirt from entering and damaging the
engine.
WARNING
Burn hazard. The engine and exhaust pipe become extremely hot during operation.
11>-
Stop the engine and allow the machine to cool before cleaning the air cleaner.
Follow
the procedure below to clean the air cleaner.
wc_gr006670
1.
The air cleaner assembly (L) is located on the right side
of
the machine behind
the control panel. Unhook and remove the air
cleaner body cover
(L1).
2.
Remove the urethane forms (L2) from the air cleaner body.
3.
Rinse the urethane forms with clean water. Squeeze out excess water {do not
twist) and dry the urethane forms thoroughly.
4. Wipe the inside
of
the air cleaner body with a clean, dry cloth.
5.
Reinstall the urethane forms inside the air cleaner body.
6.
Reinstall the air cleaner body cover.
W"CKEit
NEUSON
50 wc_tx001240gb.fm
To Next Page
Loading...
Need help?
General
