GPi 3200 I 4300 Operation
4.11
Components
Multi
monitor
(a}
AC
receptacles
(b,
c)
Ref. Description Ref.
Description
A Multi monitor K Operation hour indicator light
B AC receptacles, 20A L Voltage indicator light
c
AC receptacle, 30A
M Frequency indicator light
D
Ground lug N LED display changeover switch
E DC terminals 0 Auto-power saving switch
F DC circuit breaker
p
Auto-power saving indicator
G Key switch
Q Engine oil level warning indicator light
H Engine switch
R
AC circuit breaker
J
LCD s GFCI
The multi monitor
(a}
displays the status
of
various machine functions while the
generator is operating.
AC power is supplied through two
20A receptacles (b) and a 30A twist-lock
receptacle (c). Use only grounded, three-leg electrical plugs when connecting AC
equipment to the machine.
Ground
lug
(d)
The ground lug (d) is the terminal for grounding the generator. See topic Ground
Lug
for more information.
DC
terminals
(e)
DC
circuit
breaker
(f)
The generator provides DC power for charging batteries. The red terminal is
positive(+); the black terminal is negative(-). See topic
Using
DC
Power.
The DC circuit breaker (f) shuts off the electrical current when the current exceeds
its limit, or a malfunction occurs
in
a piece of equipment connected to the
generator.
• The DC circuit breaker has activated when the button pops out.
•
To
reset the DC circuit breaker, press the button.
Key
switch
(g)
The key switch (g) is used to start and stop the engine. See topic Starting the
Generator (Electric Start).
wc_tx001875gb.fm
31
W.\CKEit
NEUSON
To Next Page
Loading...
Need help?
General
