EasyManuals Logo

Wacker Neuson GPi 3200 User Manual

Wacker Neuson GPi 3200
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Maintenance
GPi 3200
/4300
5 Maintenance
5.1
Periodic Maintenance Schedule
The table below lists basic machine and engine maintenance. Tasks designated
with check marks may be performed by the operator. Tasks designated with square
bullet points require special training and equipment.
Refer to the engine owner's manual for additional information.
Clean generator enclosure.
Check for loose
or
missing fas-
teners.
Check engine oil level and refill
as needed.
Check AC receptacles
for
dirt
or
blockage; test GFI .
Check DC terminals for dam-
age
or
dirt.
Check engine switch and multi
monitor for proper operation.
Clean spark plug.
Clean air cleaner.
Change engine oil.
1
Clean spark arrester.
Replace air cleaner element.
Clean fuel strainer.
Clean and adjust spark plug
and electrodes.
Replace spark plug.
Remove carbon from cylinder
head.
2
Check and adjust valve clear-
ance.
2
Clean and adjust carburetor.
2
Clean and replace carbon
brushes.
W4CKER
NEUSON
Every
8
hours
(daily)
./
./
./
./
./
./
Every
Every
Every
50
100
200
hours hours hours
(weekly) (biweekly)
(monthly)
46
Every
Every
500
1000
hours
hours
wc_tx001240gb.fm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson GPi 3200 and is the answer not in the manual?

Wacker Neuson GPi 3200 Specifications

General IconGeneral
BrandWacker Neuson
ModelGPi 3200
CategoryPortable Generator
LanguageEnglish

Related product manuals