Foreword
GPi
3200
I 4300
r~~;~~=;-1
I!
~
_ljf~ABCPDP/1
:.cc·.cc~.,
..•
_._._._._._._._._._._-::.-.::.c·c~.,,._._,
...... .
wc_gr011162
Machine A nameplate listing the model number, item number, revision number, and serial
identification number is attached to this machine. The location
of
the nameplate is shown above.
Serial number For future reference, record the serial number
in
the space provided below.
You
will
(S/N) need the serial number when requesting parts or service for this machine.
I Serial Number:
Machine • From this point forward
in
this documentation, Wacker Neuson Production
documentation Americas LLC will be referred to as Wacker Neuson.
• Keep a copy
of
the Operator's Manual with the machine at all times.
• Use the separate Parts Book supplied with the machine to order replacement
parts.
• If you are missing either
of
these documents, please contact Wacker Neuson to
order a
replacement
or
visit www.wackerneuson.com.
• When ordering parts or requesting service information, be prepared to provide
the machine
model number, item number, revision number, and serial number.
Expectations •
This manual provides information and procedures to safely operate and main-
tain the above Wacker Neuson
model(s). For your own safety and to reduce the
risk
of
injury, carefully read, understand, and observe all instructions described
in this
manual.
for
information in
this manual
• Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance
or
safety standards
of
its
machines.
• The information contained in this manual is based
on
machines manufactured
up
until the time
of
publication. Wacker Neuson reserves the right to change
any portion
of
this information without notice.
• The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements
of
your specific region.
W~CKER
NEUSON
4
wc_tx001874gb.fm
To Next Page
Loading...
Need help?
General
