Emission Control Systems Information and Warranty
MAINTENANCE
MAINTENANCE, REPLACEMENT
OR
REPAIR OF THE EMISSION CONTROL DEVICES
AND
SYSTEMS
MAY
BE
PERFORMED
BY
ANY
NONROAD
ENGINE
REPAIR
ESTABLISHMENT
OR
INDIVIDUAL.
DAILY INSPECTION
Before running the generator, check the following service items:
PERIODIC MAINTENANCE
C
Safe surroundings )
'--·
___
.:::,__
__
__
( Leakage
of
gasoline and engine oil )
( Enough clean engine
oil )
(
AC
and
DC
terminals
for
damage )
Periodic maintenance is vital to safe and efficient operation of your generator.
Check the table below for periodic maintenance intervals.
IT IS ALSO NECESSARY FOR THE USER OF THIS GENERATOR TO
CONDUCT THE MAINTENANCE AND ADJUSTMENTS ON THE EMISSION·
RELATED PARTS LISTED BELOW TO KEEP THE EMISSION CONTROL
SYSTEM
EFFECTIVE.
The emission control system consists of the following parts :
(1) Carburetor and internal parts (5)
Spark plug
(8) Exhaust manifold, if
applicable
(2)
Cold start enrichment system,
if
applicable
(3) Intake manifold, if applicable
(4) Air cleaner elements
(6) Magneto or electronic ignition
system
(7)
Spark advance/retard
system, if
applicable
(9) Hoses, belts, connectors, and
assemblies
The maintenance schedule indicated in the table is based on the normal generator operation.
Should the
generator
be
operated in extremely dusty condition or in heavier loading condition, the maintenance intervals
must be shortened depending on the contamination of
oil, clogging of filter elements, wear of parts, and so on.
wc_tx001789gb.fm
65
W-'CKEit
NEUSON
To Next Page
Loading...
Need help?
General
