Foreword
Loading and transporting
BA RD24_RD28 en us 06
29
Crane loading
Special notes
•
The crane vehicle must be positioned on flat ground providing
the bearing capacity required while observing all relevant safety
regulations.
•
The crane's load table must correspond to the weight and the centre
of gravity of the machine to be lifted.
•
Take suitable precautions to block access to the lifting area in order to
prevent any person from moving or staying within the danger zone.
•
Hoisting gears may only be attached to the appropriate lifting lugs
provided for them.
•
Observe the lifting capacity of the sling gear.
•
Use lifting frames or spreader beams if necessary.
To Next Page
Loading...
