Operation
Instruments and operating elements
64
BA RD24_RD28 en us 06
319
Vibration mode manual - automatic
The operating mode for the vibration / oscillation is set with the
switch. The vibrator / oscillator can be switched on or off manually or
automatically.
Manual — PRESS
(upper pilot light illuminates)
The vibration / oscillation can be switched on or off at any time with the
switch on the multifunction handle [503].
Automatic — PRESS again
(lower control light lights up)
Switching on and off the vibration / oscillation is coupled to the road
speed. Vibration is switched off when at low or high speed.
NOTE
The automatic mode must be activated with the switch on the
multifunctional handle [503] after initial switching on.
The vibration / oscillation can be switched on or off at any time with the
switch on the multifunctional handle, even in automatic mode.
341
Water sprinkling
The sprinkling is activated as long as this switch is pressed.
343
All-wheel lock
The all-wheel lock is switched on as long as the switch is pressed.
To Next Page
Loading...
Need help?
General
