Wacker Neuson WM 130

WM 130/170/270 Repair Disassembly Procedures
wc_tx000379gb.fm 39
8. Disassembly Procedures
8.1 Draining Oil
See Graphic: wc_gr001750
Note: In the interests of environmental protection, place plastic
sheeting and a container under the machine to collect the liquid which
drains off. Dispose of this liquid properly.
8.1.1 Remove the drain plug (a) and gasket (b).
8.1.2 Remove oil gauge (c) and gasket (d).
8.1.3 Drain oil from crankcase. Replace plug, oil gauge, and gaskets when
complete.