WAGNER PS 3.20 User Manual

ProSpray 3.20 23
GB
Appendix
12.7 TempSpray
The paint material is heated to the required temperature uniformly by an electric heating
element,whichislocatedinsidethehose(regulatedfrom20°Cto60°C).
Advantages:
 • Constantpainttemperatureevenatlowoutsidetemperatures
 • Considerablybetterworkingofhighviscositycoatingmaterials
 • Increasedapplicationeciency
 • Savingsinsolventsduetoreductioninviscosity
 • Adaptabletoallairlessunits
Order No. Description
2311659
2311852
TempSpray H 126 (ideal for lacquer jobs)
Basic unit 1/4“ incl. stainless steel hose, DN6, 1/4“, 10m
Spraypackconsistingof:basicunit(2311659),AirlessgunAG14NPS1/4“,incl.
Trade Tip 2 nozzle holder (F-thread) and Trade Tip 2 Fine Finish 410
2311660
2311853
TempSpray H 226 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 15m, hose 1/4“ DN4, 1m
Spraypackconsistingof:Basicunit(2311660),AirlessgunAG14NPS1/4“,incl.
Trade Tip 2 nozzle holder (F-thread) and Trade Tip 2 nozzle 419
2311661
2311854
TempSpray H 326 (ideal for dispersions/materials with high viscosity)
Basic unit 1/4“ incl. Hose reel, heated hose DN10, 30m, hose 1/4“ DN4, 1m
Spraypackconsistingof:Basicunit(2311661),AirlessgunAG14NPS1/4“,incl.
Trade Tip 2 nozzle holder (F-thread) and Trade Tip 2 nozzle 421
TempSpray H 126
TempSpray H 226
TempSpray H 326

WAGNER PS 3.20 Specifications

General

Brand	WAGNER
Model	PS 3.20
Category	Paint Sprayer
Language	English