Waldbeck Huygens User Manual

86
EN
Reset Button and Transmitter LED
In the event that the sensor array is not transmitting, reset the sensor array.
• With an open ended paperclip, press and hold the RESET BUTTON for
three seconds to completely discharge the voltage.
• Take out the batteries and wait one minute, while covering the solar panel
to drain the voltage.
• Put batteries back in and resynchronize with console by powering down
and up the console with the sensor array about 3 meter away.
11
LED
Reset-Taste

Waldbeck Huygens Specifications

General

Brand	Waldbeck
Model	Huygens
Category	Weather Station
Language	English