Waldbeck Huygens - Alarm Mode Setting

99
EN
2. Press ALARM key again to display low alarm.
• Press RAIN key to select display rate or day rain alarm data.
• Press WIND/+key to select display wind or gust alarm data.
• Press ALARM key third time or press LIGHT /SNOOZE key back to normal
mode
Alarm mode setting:
1. Press and hold for 2 seconds ALARM key enter alarm setting mode:
2. Press the WIND/+ or PRESSURE/- to arm/disarm alerts and adjust alert
values.
3. Press the SET key to conrm & move to the next item.
4. Press the ALARM key to on/off the alarm
Note: when alert is triggered, the current triggering source icon for time,
icon for high value and icon for low value will be ashing, indicating alert
is triggered. Press ALARM key third time back to normal mode or press
LIGHT /SNOOZE key back to normal mode.
Icon for time
Icon for high value
Icon for low value