To Next Page

To Previous Page

Important Notes

1. When power on, press WIND/+ and PRESSURE /- key to reset the weather

station and clear all records memory, and clears all user settings to default.

2. When power on, press TEMP. key to skip receive RF signal.

3. In Setting mode,pressing WIND/+ or PRESSURE/- key select the unit or

scrolls the value; keeping press and holding WIND/+ or PRESSURE/- key

for 2 second will increase/decrease digits in great steps.

4. The setting procedure can be exited at any time by either pressing the

LIGHT /SNOOZE key or waiting for the 30-second time-out to take effect.

SETTINGS AND MODES

Pressing the SET key for 2 seconds to enter setting model,the basic settings

can now be performed in the following order:

BEEP

Press the SET key for 2 seconds to select the beep section, ON/OFF section

digits will start ashing, press the WIND/+ or PRESSURE/- key to select ON

or OFF. “BEEP ON” will make the Beep sound on every key press. If you do not

want the beep sound to be heard, select “BEEP OFF”

MAX/ MIN Daily

Press the SET key twice to select the MAX/MIN Daily section, ON/OFF section

digits will start ashing, press the WIND/+ or PRESSURE/- key to select ON or

OFF . (Default is ON,ON: clear at 0:00 every day).

Waldbeck Huygens User Manual

Questions and Answers: