WAM SILOTOP zero - 1.5 Request for assistance; 1.6 Warranty; 1.7 Exclusion of responsibility

1.0 GENERAL INFORMATION
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
6
For all technical assistance, contact the Manufacturer’s service network.
For all requests, provide the equipment identication data, the type of problem encountered and all other infor-
mation which could be useful for identifying the problem.
The conditions for validity and applicability of the warranty are specied in the sales contract.
The equipment is delivered according to the specications indicated by the Buyer in the order and the condi-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
- by unauthorized persons and/or persons not su󰀩ciently trained for installation, operation and maintenance;
- with modications made to the original conguration without the Manufacturer’s permission;
- with spare parts that are not original or are not specic for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.5 Request for assistance
1.6 Warranty
1.7 Exclusion of responsibility