3.0 TECHNICAL INFORMATION
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
14
3.9 Safety and information signs
A
B
C
Follow the signs on plates.
Ensure the plates are legible; otherwise clean them and replace the damaged ones, applying them in
their original position.
A) Danger sign: indicates danger of electric shock caused by the presence of powered components inside
the junction box or control panel.
B) Obligation: read this Manual before carrying out any action on the equipment concerned.
C) Obligation: indicates the hooking points for lifting each section of the equipment concerned.
To Next Page
Loading...