WAM SILOTOP zero - 8.2 How to open; close the hatch

8.0 REPLACEMENT OF PARTS
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
37
8.2 How to open / close the hatch
Remove the lock.
Open the latch.
8.1 Safety recommendations for replacement
Danger - Warning
The replacement operations must be carried out by a specialist authorized technician with specic
skills in the sector concerned (mechanical, electrical etc).
Before carrying out any operation, provide suitable safety measures and use the appropriate equip-
ment to prevent risk of work injuries to persons involved in the operations and those nearby.
Activate all the safety devices envisaged and prevent access to controls which, if activated, could
cause work injuries to the persons involved in the operations.