3.0 TECHNICAL INFORMATION
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
10
SILOTOP
®
zero is a cylindrically-shaped lter for the de-dusting (venting) of pneumatically loaded silos.
The stainless steel casing contains vertically mounted POLYPLEAT
®
lter elements. The automatic com-
pressed air cleaning system is fully integrated in the cover.
Dust is separated from the air stream through the POLYPLEAT
®
lter elements and recovered inside the silo
by the integrated automatic compressed air cleaning system.
SILOTOP
®
zero has been designed to be integrated to other systems, part of an installation, in order to realize
a well determined application.
Important
The terms “equipment”, “lter” used in this manual refer to the same machine.
As components meant for installation in a plant, the dust collector - not fully provided with safety means
- have to be considered “partly completed machinery”. Therefore, they do not bear an EC marking.
It is forbidden to start the equipment unless the equipment/plant in which it is to be installed has been
declared compliant with the Directive 2006/42/EC and further modications.
3.1 General description of the equipment
To Next Page
Loading...