WAM SILOTOP zero - 5.0 INSTALLATION AND FIXING; 5.1 Safety prescriptions for installation

5.0 INSTALLATION AND FIXING
2
FIL.SILOTOP_zero.--.M.A4.0722.EN Issue: A4
07.22
18
5.1 Safety prescriptions for installation
Danger - Warning
The replacement operations must be carried out by a specialist authorized technician with specic
skills.
Provide appropriate safety measures and use suitable equipment to prevent risk of work accident to
persons involved in the operations and to those nearby.
Harness and handle the sections of the equipment concerned as described and shown in the “Unload-
ing and lifting method” paragraph.
Before starting installation, dene a safety plan which complies with the laws in force regarding workplace
safety.
The specialist technician, authorized by the installer or owner, must assess whether the area has been pre-
pared correctly and whether the necessary installation equipment is available (crane, etc.).
Dene, on the basis of the conguration of the equipment concerned, the assembly method.
Check, and if damaged, repair the coupling surfaces.
Clean the coupling surfaces thoroughly.
General recommendations
Assembling on the silo
NO!
OK
NO!
OK!