Water I.D. Primelab 2.0 User Manual

9
The PrimeLab 2.0
Vial (24mm/16mm/1ml semi-
micro (rectangle))
Vial adapter
vial position
Triangle for correct
Power button*
Display
USB type C port
Camera
Light shield
(not necessary for
2 4m m c uv e tt e s
with black lid)
a) Press briey:
Pressing the On/Off button*
c) Press for 3 seconds:
• Sleep mode (standby)
d) Press for 10 seconds:
Emergency stop of the PrimeLab
• Shutdown
• Restart
When the device is on: option
menu for shutdown/sleep mode
appears
When device is on: Display goes
off
b) Press for 1 second:
When the device is on: "Power
menu" opens. Select between:
When device off: Switch on
Device information
Please note: In sleep- and off-mode, wait several seconds after pressing the power button for 1
second until the system has booted up and the screen has switched on. Please also note that there
may generally be a time delay between pressing the button and the response of the device.
! !
PrimeLab2.0

Water I.D. Primelab 2.0 Specifications

General

Brand	Water I.D.
Model	Primelab 2.0
Category	Measuring Instruments
Language	English