37
USB
Connectivity:
Available for you soon: USB type C to USB type A adapter
Some peripherals might have a USB type A plug (e.g. GSM-
modem) which does not match the USB type C plug of your
PrimeLab 2.0. In this case, just use the USB type C to USB type A
adapter.
4G*
PrimeLab comes with an in-built Wi-Fi option. Nevertheless, there
might be no Wi-Fi network available in field but still you want to have
full connectivity and instant upload to the LabCOM® cloud. In such
cases, just plug a GSM-modem* with proper SIM card into the USB-
slot of your PrimeLab. An internet connection will be established
instantly (subject to network coverage).
When connecting the PrimeLab 2.0 to your computer via USB, you
can choose to auto-install the LabCOM® software (Windows and
Mac) and to synchronize all data from your PrimeLab 2.0 with the
LabCOM® software. A more convenient way would be to link both,
your PrimeLab 2.0 as well as your computer, to the LabCOM® cloud
(see menu ‘Cloud‘), enabling real-time synchronization.
Charge the PrimeLab 2.0 in-built battery or connect the PrimeLab
2.0 to your computer, using the USB-cable given with your
PrimeLab 2.0. If your battery is empty, the PrimeLab 2.0 needs at
least 5min before it can be started with the cable connected. The
power button always lights up red as soon as the charging cable is
connected. Once the device is 100% charged, the power button no
longer lights up.
Charger/USB-cable
PrimeLab 2.0 offers various connection options. Simply connect the associated parts to the USB
(type C) port on the left side of the PrimeLab 2.0..
*via USB Internet Stick / accessories / may be subject to costs for connection
In some cases, the single USB type C connector on your PrimeLab
2.0 might not be enough. The PrimeLab USB-HUB expands the
USB type C on the PrimeLab to 1x USB type C plus and 3x USB type
A.
Hub
PrimeLab2.0
To Next Page
Loading...
Need help?
General
