Turn off the device in potentially explosive environments
• When the device smokes or emits a burning odour, it may result in battery explosion or fire.
• Broken glass or acrylic could cause injury to your hands and face.
Care and use your device properly
Use the device again only after it has been repaired by the manufacturer or someone who was approved by the
manufacturer.
If your device falls, it may be damaged.
Do not store your device in very hot areas such as inside a car in the summertime.
Doing so may cause the screen to malfunction, result in damage to the device, or cause the battery to explode.
• Do not expose your device to direct sunlight for extended periods (on the dashboard of a car, for example).
Do not expose the device to heavy smoke or fumes
• Do not use your device at refuelling points (petrol stations), near fuels or chemicals, or in blasting areas.
If you use a hearing aid, contact the manufacturer for information about radio inter-
ference
• Humidity and liquids may damage the parts or electronic circuits in your device.
The radio frequency emitted by your device may interfere with some hearing aids. Before using your device, contact
the manufacturer to determine whether your hearing aid will be affected by radio frequencies emitted by the device.
Doing so may damage the outside of the device or cause it to malfunction.
• Always comply with regulations, instructions and signs in potentially explosive environments.
• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its
parts, or accessories.
If any part of the device is broken, smokes, or emits a burning odour, stop using the
device immediately.
Comply with all safety warnings and regulations regarding device usage while
operating a vehicle
While driving, safely operating the vehicle is your first responsibility. Never use your device while driving, if law
prohibits it. For your safety and the safety of others, use your common sense and remember the following tips:
• Do not use your PrimeLab 2.0 while driving. You could be distracted from the road and cause a car accident.
• Keep your device dry
• Do not turn on your device if it is wet. If your device is already on, turn it off (if the device will not turn off, leave it as-
is). Then, dry the device with a towel and take it to a service centre.
• This device has internal liquid indicators fitted. Water damage to your device may void the manufacturer’s warranty.
Store your device only on flat surfaces
Do not store your device with metal objects, such as coins, keys, and necklaces
• Your device may be scratched or may malfunction.
66
Continued...
Safety Instructions
PrimeLab2.0
To Next Page
Loading...
Need help?
General
