EasyManua.ls Logo

Weber Summit E-470 - User Manual

Weber Summit E-470
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
845BR-0035
0845
59828
EN - ENGLISH
04/01/18
E-470 · S-470
LP
Thank you for purchasing
a WEBERgrill. Takea few
minutes and protect it by
registering your product
online at www.weber.com.
m DANGER
If you smell gas:
1) Shut o gas to the
appliance.
2) Extinguish any open
flames.
3) Open lid.
4) If odour continues, keep
away from the appliance
and immediately call your
gas supplier or your fire
service.
Leaking gas may cause a fire
or explosion which can cause
serious bodily injury, death, or
damage to property.
m WARNING
1) Do not store or use petrol
or other flammable liquids
or vapours in the vicinity of
this or any other appliance.
2) A gas supply cylinder not
connected for use shall not
be stored in the vicinity of
this or any other appliance.
m WARNING: Carefully follow all
leak-check procedures in this
Owner’s Guide prior to grill
operation. Do this even if the
grill was dealer-assembled.
m WARNING: Do not ignite
this appliance without first
reading the BURNER IGNITION
sections of this Owner’s
Guide.
OUTDOOR USE ONLY.
NOTICE TO INSTALLER: These
instructions must be left with the
owner, who should keep them for
future use.
YOU MUST READ THIS OWNER’S GUIDE BEFORE
OPERATING YOUR GAS GRILL.
GRILL OWNER’S GUIDE

Table of Contents

Other manuals for Weber Summit E-470

Preview: Manual
Manual2 pages
Preview: Quick Start Guide
Quick Start Guide2 pages
Preview: Assembly Instructions
Assembly Instructions2 pages

Questions and Answers

  • C
    Connie EdwardsAug 29, 2025
    What to do if the burner on my Weber Summit E-470 Grill won't light or has a low flame?
    • D
      Daniel LopezAug 30, 2025
      If the burner on your Weber Grill does not light or the flame is low in the HI position, first, check if the LP fuel is low or empty and refill the LP cylinder if needed. Next, inspect the fuel hose for any bends or kinks and straighten it. If the burner still doesn't light, try cleaning the burners. Also, make sure to hold the control knob in for two seconds after snapping the igniter and seeing the orange flame from the burner lighting tube.
  • W
    William BeckerAug 28, 2025
    Why won't the burners light on my Weber Grill, or why is the flame weak?
    • C
      Christina AlvarezAug 28, 2025
      If the burners on your Weber Grill do not light, have a small flickering flame in the HI position, or if the barbecue temperature only reaches 250° to 300° in the HI position, the excess flow safety device may have activated. To reset it, turn off all burner control knobs and the cylinder valve. Disconnect the regulator from the cylinder. Turn burner control knobs to HI and wait at least one minute. Then, turn the burner control knobs to OFF. Reconnect the regulator to the cylinder and slowly turn the cylinder valve on.
  • J
    Joshua HallAug 27, 2025
    What to do if Weber Grill burner does not light?
    • K
      kevinhawkinsAug 27, 2025
      If your Weber Grill burner doesn't light, or the flame is low in the HI position, consider the following: * Refill the LP tank if the fuel is low or empty. * Straighten the fuel hose if it is bent or kinked. * Clean the burners. * When igniting, hold the control knob in for two seconds after seeing the orange flame from the burner lighting tube. * If the igniter doesn't work, try manually lighting the burner. Call Customer Service if needed.
  • A
    Amy LarsenAug 27, 2025
    Why won't the burner light on my Weber Grill, or why is the flame low?
    • C
      Christopher MooreAug 27, 2025
      If the burner on your Weber Grill doesn't light or the flame is low in the HI position, first check if the fuel is low or empty and refill the LPG cylinder if needed. Ensure the fuel hose isn't bent or kinked; if it is, straighten it. If it still doesn't light, try manually lighting the burner. If the igniter doesn't work and you don't see a spark, try manually lighting the burner and call Customer Service. Also, make sure you hold the control knob in for two seconds after snapping the igniter and seeing the orange flame from the burner lighting tube.
  • D
    Daniel SolisAug 25, 2025
    What to do if Weber Grill burner won't light or flame is low?
    • L
      Laura FoxAug 26, 2025
      If your Weber Grill burner won't light or the flame is low on HI, consider the following: * Check if the LP fuel is low or empty and refill the LP cylinder. * Ensure the fuel hose isn't bent or kinked; straighten it if necessary. * If the burner lights with a match, inspect the ignition system. * If you used the snap igniter multiple times, hold the control knob in for two seconds after seeing the orange flame from the burner lighting tube. * If the igniter isn't sparking, try manually lighting the burner.
  • K
    Kevin GuerreroAug 25, 2025
    What to do if my Weber Grill is experiencing flare-ups?
    • A
      Angela ThompsonAug 25, 2025
      If your Weber Grill is experiencing flare-ups, try the following: preheat the grill with all burners on HI for 10 to 15 minutes, clean the grill thoroughly, and ensure the slide-out grease tray is clean. Do not line the slide-out grease tray with aluminum foil.

Summary

WARNINGS

General Safety Warnings

Key safety instructions and warnings for operating the grill, including dangers and cautions.

GENERAL INSTRUCTIONS

Gas Instructions Overview

Essential information and safety tips for handling LP gas cylinders.

GAS INSTRUCTIONS

Installing Gas Cylinder

Step-by-step guide for properly installing the gas cylinder on or near the grill.

Connecting LPG Cylinder

Instructions for securely connecting the LPG cylinder to the grill's regulator.

Leak-Check Preparation

Steps to prepare the grill for leak checking gas connections before operation.

Checking for Gas Leaks

Procedure for testing gas connections for leaks using a soap solution.

BEFORE USING THE GRILL

Hose Inspection

SNAP IGNITION OPERATION

Igniting Burners with Snap Ignition

Step-by-step guide for igniting burners using the snap ignition system.

MAIN BURNER IGNITION & USAGE

Main Burner Ignition

How to ignite the main burners using the snap ignition system.

Main Burner Manual Ignition

Procedure for manually igniting the main burners if the snap ignition fails.

COOKING METHODS

Direct Cooking

Indirect Cooking

SIDE BURNER IGNITION & USAGE

Side Burner Ignition

Side Burner Manual Ignition

SEAR STATION IGNITION & USAGE

Sear Station Burner Ignition

Sear Station Manual Ignition

ROTISSERIE BURNER IGNITION & USAGE

Rotisserie Burner Ignition

Rotisserie Burner Manual Ignition

Important Safeguards

Essential safety precautions for using the rotisserie attachment.

Operating the Rotisserie

TROUBLESHOOTING

Burner Troubleshooting

Common issues with burners, flame patterns, and temperature.

Side Burner Troubleshooting

Solutions for issues with the side burner not lighting or having low flame.

Sear Station Troubleshooting

Solutions for common problems encountered with the Sear Station burner.

Rotisserie Troubleshooting

Solutions for issues related to the rotisserie burner not igniting.

Weber Summit E-470 Specifications

General IconGeneral
Main Burners4
BTU-per-hour Input48, 800 BTU
Side BurnerYes
Sear Station BurnerYes
Smoker Box and BurnerYes
Rotisserie BurnerYes
Dimensions - Lid Closed50.5"H x 66"W x 26.5"D
BTU Side Burner12, 000 BTU
Grates MaterialStainless Steel
Grill MaterialStainless Steel
Ignition SystemSnap-Jet Individual Burner Ignition System
Fuel TypeLiquid Propane
BTU Sear Burner10, 600 BTU
BTU Smoker Burner6, 800 BTU
Cooking Area468 square inches
Warming Rack Area112 square inches
Warranty10 years
Total Cooking Area580 square inches

Related product manuals