EasyManuals Logo

Weber Summit Series Installation And Operating Guide

Weber Summit Series
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
LIGHTING THE SIDE BURNER
CAUTION: Side burner flame may be difficult to see
on a bright sunny day.
WARNING: If the side burner does not light:
a) Turn off the side burner control valve.
b) Wait 5 minutes to let the gas clear before you try
again or try to light with a match.
WARNING: The container and contents used on the side
burner should not exceed a maximum of 50 pounds. The
container should not exceed 14 inches in diameter.
The side burner has a separate ignition system from the
main cooking box.
Lighting only the side burner. Figure 15.
1) Open the side burner lid.
2) Check that the side burner valve is OFF (push in and turn
clockwise), and all main burner control knobs are OFF
(push down and turn clockwise).
3) Turn the gas supply on.
4) Push in and turn the side burner control knob to HI.
5) Push the side burner igniter button several times so it
clicks each time.
Figure 15
DANGER
Failure to open lid while igniting the side
burner, or not waiting 5 minutes to allow gas
to clear if the side burner does not light,
may result in an explosive flame-up which
can cause serious bodily injury or death.
1
5
4
2

Other manuals for Weber Summit Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Weber Summit Series and is the answer not in the manual?

Weber Summit Series Specifications

General IconGeneral
BrandWeber
ModelSummit Series
CategoryGrill
LanguageEnglish

Related product manuals