129V2.0/02.11
Descriptionofthememoryfunctions
ENGLISH
ImportantinformationabouttheSTART/STOPmode:
START/STOP
The settings made under REC CONFIG are not
relevant in this mode. The recording time is still
unknown when the process of recording meas-
ured values begins. For this reason, the recording
interval is dynamically optimised and appropriately
adapted as the measured values are being record-
ed. The curve memory can store approx. 120.000
measured values.
When SCPT sensors are connected, the meas-
urement values for temperature and pressure are
saved at the same recording interval.
To Next Page
Loading...